Heiniger's best selling Xplorer has just been upgraded. The all new Heiniger Xplorer Pro Cordless Clipper is ideal for professional horse and cattle clipping. Even more powerful than the Xplorer, the Xplorer Pro has 2 speed settings of 2450 and 2900 dbs/minute and an integrated shearing pressure indicator. Also lighter than the original Xplorer, (weighing just 975 grams) and quieter. The first clipper to date to include a patented tension indicator which provides more precise clipping than ever before and extends the clipper’s life. Due to it's unique double gear wheel, power is optimally transferred from the motor to the clipper head, providing low vibration. Comes with 2x 10.8v Lithium-ion rechargeable batteries to deliver 120 minutes of clipping time each from a 90 minute recharge, allowing you to clip and charge at the same time for endless run-time. LED power indicator shows battery charge level.
More details below.
Comes complete with: Xplorer Pro cordless clipper with wrist loop, 2 rechargable Lithium-ion batteries, 35F/23 standard horse and cow blade set, hard-sided storage carry case, charging dock, power pack with NZ plug, full size oil, Heiniger screwdriver (for easy blade changes), cleaning brush, detailed operating instructions. See Specifications below for blades information.
TIP: Lefty loosey, righty tighty! Watch the video below for how to tighten your Xplorers. The easy way to set the tension is with the clipper on, adjust the tension looser (turn dial left) until you hear the blade noise change. While still running, tighten the tension (turn dial right) slowly just until you hear the blade noise change again. Give it a further 2 half turns and start clipping. If needed, you can further tighten a quarter turn at a time (remember to clip in-between to test).
Watch the videos below to see the Xplorer in action and how to set blade tension.
This clipper comes with the standard equine blade set 35F/23 for that show finish, leaving a smooth and long lasting finish with 1-2mm of cover.
Keep blades lubricated following oil instructions (included with the clippers).
Use Heiniger Special Oil (available from AllGroom) to extend blade performance, a biodegradable non-toxic clipper oil developed by Heiniger.
Note that fine blades (indicated by an F) leave a shorter finish. A 31 blade is 2 to 4mm versus a 31F (fine) which is 1 to 2mm for example.
Swapping blades is a simple matter of unscrewing and changing the blades, screwing them back up and adjusting the tension. See the video on the Details tab showing how to adjust the tension. A special screwdriver is included with your Xplorers for changing blades.
Heiniger Cleaning and Care Instructions
(a printed copy of these instructions is also included with your Xplorer clippers)
After clipping, remove all oil from the machine by rubbing it down with a dry cloth and carefully clean the head and blades with a dry brush as supplied with each new machine.
The use of kerosene or other liquid may cause the parts to wear prematurely. Do not use compressed air to clean any area of the machine. Regularly cleaning the air filter with a dry brush is essential.
NEVER IMMERSE OR CLEAN THE MACHINE IN WATER OR OTHER LIQUID
KEROSENE AND OTHER CLEANING PRODUCTS ARE NOT A FORM OF LUBRICATION
The blades and machine head must be adequately lubricated during clipping so that they don’t run dry and become hot. Re-oil the parts after cleaning to prevent rusting.
If the clipping pressure is too low, hair can gather between the clipping blades. This results in a poor clipping quality.
In this case, clean the clipping blades as described in the manual.
When will my order leave?
Same day dispatch for orders placed before 1pm Mon-Fri. Orders placed over the weekend or public holiday will be dispatched next business day.
When will my order arrive?
For New Zealand orders, most parcels arrive 1 to 2 working days after they've left us. Allow an extra day or two for rural delivery.
For Australian orders, estimated delivery is 3 to 7 working days after they've left us.
How much is shipping?
Shipping is estimated by weight and starts from $5. The website works out shipping in checkout, before you pay.
Are you in stock?
Stock levels on our website are live. What's showing in stock online is physically in stock in our NZ warehouse, ready to ship. Please note we do not work with back-orders.
My delivery question is not answered here
Head to the HELP section, and search for more answers.
Returns & Guarantees
AllGroom is proud to offer the best grooming brands at affordable prices, without compromising service and support. However, if something goes wrong or you are not completely satisfied with a product you’ve purchased from us, please let us know right away. We stand by our products and we’d like the chance to put it right.
Can I return what I've purchased?
To request a return, head to our contact page to fill up the form.
By law we don't have to accept change of mind returns, so before you buy, please check with us first if you're not 100% sure if a product matches your needs. Keep in mind a change of mind return is not the same as a warranty return (for a suspected fault or defect), but purchasing the wrong product is considered change of mind. You can also read more about your consumer rights if you change your mind
Is my product covered under warranty?
Most electrical items, such as clippers, trimmers and dryers, come with a 12 month warranty covering manufacturing faults or defects. For more about warranties, click here.